Dr. Charudatta Pathak :-

1) Dhirajkumar D. Saindane, Charudatta S. Pathak, Swapnil S. Kulkarni and A. Satheesh, Investigation of the Structural Borne Noise Due to Suspension System in a Vehicle Cabin, International Journal of Control Theory and Applications, ISSN : 0974-5572, International Science Press, Volume 10 • Number 39 • 2017, pp 25-31

2) SurbhiRazdan, Dr. C S Pathak, Dr. S Y Bhave, Dr. P J Awasare, Mathematical modeling and simulation of quarter car model of an active air suspension, International Journal of Academic Research and Development, ISSN: 2455-4197, Volume 3; Issue 1; January 2018; Page No. 63-69

3) SurbhiRazdan, Suresh Y. Bhave, Charudatta Pathak, Pradeep J. Awasare, Active Air Suspension for a Vehicle Based on Control of Air Mass Flow Rate, International Review of Mechanical Engineering, Vol 12 (No 6), 2018, pp 501-515

4) Pathak, C., Dodkar, P. Effect of Shot Blasting and Shot Peening Parameters on Residual Stresses Induced in Connecting Rod. Trans Indian Inst Met 73, 571–576 (2020). https://doi.org/10.1007/s12666-020-01866-3

Rajkumar Baghel :-

Design and Analysis of Press Tool for Combining Notching and Piercing Operation,
International Journal of Advanced Engineering & Innovative Technology (IJAEIT) ISSN: 2348 7208, April 2019

Sumit Dubal :-

  • Sumit V.Dubal, “Optimization and Analysis of Front Telescopic Suspension for Electric Bike to Have Comfortable Ride: India Perspective. Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering. 2020. Lecture Notes in Mechanical Engineering. Springer, Singapore.
  • Sumit V.Dubal, Dr.Sachin Chavan, “Nanotechnology in Automobiles: A Comprehensive Review”, International Journal of Modern Trends in Engineering and Science, Volume:07 Issue:02,  2020
  • Sumit V.Dubal, Amit Gundale, Amol Ganje, Vishal Beldar, “Review on Cooling and Power Generation by using Thermoelectric Module” Journal of Emerging Technologies and Innovative Research (JETIR), Volume 6, Issue 4, April 2019.
  • Sumit V.Dubal, “Oil Seal: Installation Techniques and Preventive Measures to avoid leakage” International Journal of Innovative Research in Technology (IJIRT) Feb2017.
  • Sumit.V.Dubal, Hemantkumar Kadam, “Pressure Vessel Accidents: A Safety Approach” International Research Journal of Engineering and Technology, Volume (IRJET),125-128, 2017
  • Sumit.V.Dubal, “Finite Element Analysis of Reactor Pressure Vessel under Different Loading Conditions”. IEEE Xplore, 2015

Sumit.V.Dubal, “Review on Stresses in Cylindrical Pressure Vessel and its design   As Per ASME Code”. International Journal of Engineering Trends and Technology (IJETT) Volume 11Number 6-May2014.

Roshan Devidas Bhagat :-

  1. Manish S. Lande, Roshan D. Bhagat, Thermal Analysis of Combustion Chamber of Two Stroke SI Engine, International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-018,Vol. 2 Issue 12, December – 2013, Available @ http://www.ijert.org.
  2. Roshan D. Bhagat, Manish S. Lande, Small Scale Generation By Harnessing The Wind Energy, International Journal for Research in Engineering and Technology (IJRET) eISSN: 2319-1163| pISSN:2321-7308, Impact Factor (2013): 2.375,Available @ http://www.ijret.org.
  3. Roshan D. Bhagat, Prof. Kiran M. Watt, Closed Loop Pulsating Heat Pipe with Hydrocarbon as Working Fluid: A Review, International Journal of Science and Research (IJSR) ISSN (Online): 2319-7064 Impact Factor (2012): 3.358, Volume 3 Issue 10, October 2014, Available @ http://www.ijsr.net.
  4. Roshan D. Bhagat, Prof. Kiran M. Watt, Effect of Dimensionless Number on Thermal Performance of Closed Loop Pulsating Heat Pipe: A Review, International Journal of Science and Research (IJSR) ISSN (Online): 2319-7064 Index Copernicus Value (2013): 6.14 | Impact Factor (2013): 4.438, Volume 4 Issue 2, February 2015, Available @ http://www.ijsr.net
  5. Roshan D. Bhagat, Prof. Kiran M. Watt, An Experimental Investigation of Methanol Closed Loop Pulsating Heat Pipe at Variable Water Bath Temperature, International Journal of Science and Research (IJSR) ISSN (Online): 2319-7064 Index Copernicus Value (2013): 6.14 | Impact Factor (2013): 4.438,Volume 4 Issue 2, February 2015, Available @ http://www.ijsr.net.
  6. Roshan D. Bhagat, Prof. Kiran M. Watt, Effect of Water Bath Temperature on Evaporator and Condenser Temperature of Closed Loop Pulsating Heat Pipe With Acetone as Working Fluid, International Journal for Research in Engineering and Technology (IJRET) eISSN: 2319-1163| pISSN:2321-7308, Impact Factor (2013): 2.375,Volume 4 Issue 2, February 2015, Available @ http://www.ijret.org.
  7. Roshan D. Bhagat, Prof. Kiran M. Watt, Experimentation to Predict the Thermal Perfomance of Closed Loop Pulsating Heat Pipe with Acetone and Methanol as Working Fluid, International Journal for Research in Engineering and Technology (IJRET) eISSN: 2319-1163| pISSN:2321-7308, Impact Factor (2013): 2.375,Volume 4 Issue 4, April 2015, Available @ http://www.ijret.org.
  8. Roshan D. Bhagat, Prof. Kiran M. Watt, Performance Investigation of Closed Loop Pulsating Heat Pipe with Acetone as Working Fluid, International Journal for Research in Engineering and Technology (IJRET) eISSN: 2319-1163| pISSN:2321-7308, Impact Factor (2013): 2.375, Volume 4 Issue 4, April 2015, Available @ http://www.ijret.org
  9. Roshan D. Bhagat, Prof. Kiran M. Watt, Performance Investigation of Closed Loop Pulsating Heat Pipe with Methanol as Working Fluid, Proceedings of Mechanical Engineering Post Graduate Conference at PRMIT & R Badnera- Amravati, MEPCON-2015. International Journal of Innovative and Emerging Research in Engineering, eISSN: 2394-3343| pISSN: 2394-5494, Volume 2, Special Issue 1 MEPCON 2015, Available @ http://www.ijiere.com.
  10. Roshan D. Bhagat, Prof. Kiran M. Watt, Effect of Bond Number on Thermophysical Properties of Working Fluid used in Closed Loop Pulsating Heat Pipe: A Review, International Journal of Science and Research (IJSR) ISSN (Online): 2319-7064 Index Copernicus Value (2013): 6.14 | Impact Factor (2013): 4.438,Volume 4 Issue 9, September 2015, Available @ http://www.ijsr.net.  Roshan D. Bhagat, Yogesh P. Tidke, Performance Investigation of Solar Cell with and Without Concentrator, Proceedings of National Conference on “Renewable Energy Resources and its Application 2 April 2016 at COET Akola
  11. International Journal of Pure and Applied Research In Engineering And Technology(IJPET), ISSN: 2319-507X, impact factor 4.226,Volume 4 (8): 228-244,Available @ http://www.ijpret.com
  12. Roshan D. Bhagat, Sudhir P. Dhomane, Performance Investigation of Conventional Heat Pipe with Hydrocarbon as Working Fluid, International Journal for Research in Engineering and Technology (IJRET) eISSN: 2319-1163| pISSN:2321-7308, Impact Factor (2014): 3.127, Impact Factor (2013): 2.375, Volume 5 Issue 3, March 2016, Available @ http://www.ijret.org.
  13. Roshan D. Bhagat, Shashikant R. Thakare, Sanjaykumar C. Makwana, Experimentation to Predict the Thermal Performance of Conventional Heat Pipe with water and Hydrocarbon as Working Fluid, International Journal for Research in Engineering and Technology (IJRET) eISSN: 2319-1163| pISSN:2321-7308, Impact Factor (2014): 3.127, Impact Factor (2013): 2.375, Volume 5 Issue 3, March 2016, Available @ http://www.ijret.org.
  14. Roshan D. Bhagat, Prof. Kiran M. Watt, Effect of Bond Number, Working Fluid and Operating Temperature on Thermal Performance of Closed Loop Pulsating Heat Pipe, Proceedings of International Conference on Science and Technology for Sustainable Development, Kuala Lampur Malaysia, Satellite Conference Venue at PRMIT & R Badnera 24-26 May 2016.
  15. Roshan D. Bhagat, Kiran M. Watt, Experimental Investigation of Heat Transfer Capability and Thermal Performance of Closed Loop Pulsating Heat Pipe with A Hydrocarbon as Working Fluid, Global Digital Centrals Frontiers in Heat Pipe ISSN: 2155-658X, Volume 6 No. 1 (2015), Available at www.ThermalFluidsCentral.org.
  16. Roshan D. Bhagat, Experimental Investigation of Thermal Performance of Conventional Heat Pipe with Water, Acetone and Methanol as Working Fluid, Global Digital Centrals Frontiers In Heat Pipe ISSN: 2155-658X, Volume 7 No. 4 (2016), Available at www.ThermalFluidsCentral.org.
  17. Roshan D. Bhagat, Kiran M. Watt, An Experimental Investigation on Thermal Performance of Closed Loop Pulsating Heat Pipe and Conventional Heat Pipe With Hydrocarbon as Working Fluid, Proceedings of National Conference On Innovation In Mechanical Engineering, Sinhgad Institute Of Technology Lonavala, 7-9 April 2017.
  18. Roshan D. Bhagat, Performance Investigation of Closed Loop Pulsating Heat Pipe with Water and Hydrocarbon as Working Fluid, Proceedings of National Conference on Recent Innovation in Mechanical Engineering, JSPM’s Narhe Technical Campus in association with IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684,p-ISSN: 2320-334X PP. 33-37, Pune, 27-28 February 2018, Available at www.iosrjournals.org
  19. Roshan D. Bhagat, Thermal Management of Solar Photovoltaic Panel for Performance Enhancement: A Review, proceedings of international conference on industry 4.0, Prof. Ram Meghe institute of Technology and Research Badnera Amravati, 28-30 November 2019